Ross-Tech is not responsible for any damage or problems that may result from following these instructions. They are to be used at your own risk.
These instructions apply to the VW Passat (3C/AN) MY 2011 only and VW Passat CC (35/AN) MY 2011 and up. These vehicles use a 'BCM' instead of the the older / conventional 09-Central Electronics module. This can be easily identified by looking at the Component Field in VCDS for the BCM identification.
Vcds Lite Hacks For Pc
Note: For many 20010 and older vehicles, the previous generation 09-Central Electronics module is installed. Those models are not covered on this page but the common tweaks can be found here instead: Common Modifications & Tweaks
Vagcom 12.12 OBD2 Interface Vag com 12.12 vcds interface. Description Add to Cart; $149.00. Digiprog 3 V4.94 odometer correction digiprog. VCDS lite 1.2 full registred /activated VCDS lite 1.2 est un outil bas sur Windows de diagnostic pour VW / Audi / Seat / Skoda en cas de non-dongle interfaces. Hacked Copy of VCDS bricked my cable; Results 1 to 23 of 23 Thread:. As well as the serial number shown by the copy of VCDS that it was last used with. Hack Engine Team: VCDS-Lite Release + loader Hack Engine Team: pin. TPMS - A3 2012 - Coding Issues? VCDS users please check! Audi However, when I go to change the. Jan 03, 2019 RE: VCDS v1.2 Lite Activated -11:59 AM The ross-tech installer has. Bitdefender keygen 2013 resolume arena 4.1.1 union crack 6/20/2018, 11:00pm. Crack vcds lite.
How to install VCDS cable from third parties and how to register the third party cables to use with VCDS Lite.
The installed control modules vary by vendor, firmware level and equipment level, some of the noted tweaks may not be supported by all control modules / vehicles. [08] - Heating/Air Conditioning
Drivers heated seat memory
The Driver side heated seat level (i.e. 1, 2 or 3) should resume the previous level upon restarting the car.
[09] - Central Electronics / Body Control Module (BCM)
Note:Make sure to have all Doors unlocked, otherwise this Control Module may not communicate with the Scan Tool / VCDS.
Lighting
All modifications are found in Found in [Coding - 07] > Long Coding Helper unless otherwise noted. Click on each of the Bytes and Bits for the documented options and check or un-check the appropriate boxes as shown in the example below:
[Select]
[09 - Cent. Elect.]Or the module you intend on tweaking as per the list below [Coding - 07] [Long Coding Helper] Click on each of the Byte numbers in row 3) and you'll see the selectable options below. Check or Un-check the boxes for the desired results. Example: Permanent Running Light (PRL) via Low Beam active
Close the Long Coding Helper by clicking the Windows X box on the top right of the screen or clicking the Exit button on the top left of the screen to send your altered Coding value back to the Coding screen.
[Do It!] .
Daytime Running Lights - The lamp systems (i.e. DRL or PRL) are different and only ONE option is enabled:
Fogs as Daytime Running Lights Xenon or Halogen DRL's that are using the main low/dipped beam (PRL)
Fogs and Headlights as DRLs (Both) Xenon or Halogen DRL's that are using the main low/dipped beam (PRL)
Fogs as Daytime Running Lights for alternate configurations Factory configurations using a separate bulb or filament for DRL function only (DRL)
Note: Depending on the Byte 18 coding, this may result in all of the parking lights illuminating. Cornering Lights via Front Fog Lights active
Notes: After 'Cornering Lights via Front Fog Lights active' is enabled, the lights may work under the following conditions:
Front and /or Rear Fog Light dimming behavior with High Beams
Comfort Turn signals
Emergency Brake Warning via turn signals and/or via brake lights active The vehicle must be under panic stopping conditions before the lighting activates as shown here. Byte 18 - Do Not alter this if you are not retrofitting rear lights ! Coming Home / Leaving HomeVcds Lite Full Version Free
Options are primarily found in Coding, Long Coding helper. Some Adaptation Channels may be available after enabling coding options.
Coming Home
Leaving Home
Coming Home/Leaving Home via Fog-Lights and Parking lights
[17] - Instrument Cluster
Staging
The gauge needles should sweep from default to max upon starting the car. This is Not supported on all instrument clusters. Vcds Lite Cracked Version
Seat Belt Light May remove the chime as well
Service Interval Reset
Modify Service Intervals Mileage and Time
Fuel Gauge and Fuel Consumption Adaption
[46] - Comfort SystemWindows
Found in [Coding - 07] > Long Coding Helper
Windows up via remoteComfort Operation (via Remote Control)
Note, For some reason, VW does not allow the sunroof to be opened using the remote, only closed, despite the presence of a checkbox indication for that feature.
Alarm and Locking
Options are primarily found in [Coding - 07] > Long Coding Helper. Additional Adaptation -10 Channels may be available after enabling coding options.
Alarm Confirmation via lights and horn
Auto-Lock
Auto-UnLock
Vcds Lite Crack Download
Retrofits
Some of the common retrofits are found in the Ross-Tech Wiki in this location: Retrofitting.
Vcds Lite Hacks 2017
Retrieved from 'http://wiki.ross-tech.com/wiki/index.php?title=VW_Passat_(36)_Tweaks&oldid=6297'
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |